CEESC Large Cat Flap (Outer Size 11″ x 9.8″), 4 Way Locking Large Cat Flap Door for Interior Exterior Doors, Weatherproof Pet Door for Cats & Doggie with Circumference < 24.8" (White)

Product Description

Additional Massive Cat Door Specs

Word:

Outer Measurement: 9.8″ x 11″ x 2.15″(W x H x D);
Inside measurement: 7.9″ x 8.7″(W x H);
Reduce-Out Measurement: 8.3″ x 9.5″ (W x H);
Match Cats as much as 25.54 lbs （The waistline lower than 24.8″ );
Materials: ABS plastic
Coloration: White
Type: Flap
Weight: 1.19 lb

Guarantee that the width and top(shoulder stage) of the pet are inferior to the pet display door, thanks.
The depth of door/wall/window you will set up to had higher greater than the depth 2.17″, in order to screw in 8 screws from either side simply.

Package deal Contains of CEESC Additional Massive Automobile Door :

1 X Massive Cat flap door

8 X Screws

8 X Screw caps

1 X Set up directions

If the cat door is simply too thick for the door, please use scissors or reducing machine to chop alongside the road within the width of the body.

Installion directions

1. Draw define on the paper board

Draw the cat door body on a paper board and lower it down.

Word:

You had higher put together these essential instruments first, pencil, ruller, electrical noticed, drill, screwdriver, double-side tape.

2. Draw define on the door

Use a pencil draw across the fringe of the lower paper on the door you need to be fastened to.

Word:

Usually, common set up top is round 10-15 cm from the ground.

3. Drill 4 corners for holes

Drill 4 corners for thorough holes first with an electrical drill.

4. Reduce out a tunnel gap

Reduce out the tunnel gap with an electrical noticed beginning at holes drilled.

5. Put the cat door within the door

After the tunnel gap is lower out, it is higher to wrap round it with a layer of wooden pores and skin. And in case your gap is reducing a bit large, it is fairly neccessary.

6. Reduce down tunnel depth if essential

If the cat door is simply too thick in your door, use a scissors or reducing machine to chop down some a part of tunnel alongside the road A or B. The reducing scale is about 2-4CM.

7. Mount to the door

Mount the cat door with double-side tape to the door. 8 screws have been supplied in your use, tighten them with a screwdriver on either side.

Word:

8 screws for 4 holes on either side, screw all of them in 2 sides as illustration proven above, please. These 8 screws are designed to work collectively, they don’t seem to be brief.

8. Accomplished

Place screw caps over the screw holes, press them on. The set up is totally completed.

☞4 WAY SWITCH MODE — The pet door may very well be adjusted by the Purple and Inexperienced switches with tabs to 4 modes: out solely, in solely, each out and in, and absolutely locked, straightforward management of your pet’s out and in.
☞SIZE & APPLICATION — Outer Measurement: 9.8″ x 11″ x 2.15″(W x H x D), Inside measurement: 7.9″ x 8.7″(W x H), Reduce-Out Measurement: 8.3″ x 9.5″ (W x H), appropriate for set up on doorways and skinny partitions, appropriate for cat and doggie lighter than 27.54 lb and waist circumference shorter than 24.8″
☞SAFE & THOUGHTFUL — The clear flap let pet see by the door. Exterior rain seal is for waterproof. Brush strip eliminates noise from the door closing.
☞EASY TO INSTALL — Full directions included, make you simply set up in home windows, doorways, cabinets, panels and partitions and so on.
☞EXCELLENT QUALITY — Made from ABS materials, weather-resistant, the floor is easy and sturdy.